Guidance Table for Deep Inspection of Chemical (Hazardous Chemicals) Enterprises I. Guidance Contents for Inspection of Design Specialty Inspectio n Inspection Guidance Guidance Item Project Number (1) Number Inspectio of n Inspectio guidance n Inspection Guidance Contents Guidance Content Safety Review of Construction Projects 1 Whether the construction projects (including long-distance pipelines) for the production and storage of dangerous chemicals newly built, rebuilt and expanded results have passed the safety inspection. (two) Safety Facility Design Whether the design diagnosis (review) has 2 been completed for the production equipment and storage facilities. Whether the hidden dangers and problems 3 found in design diagnosis (review) have been rectified or not. 4 Whether the safety facilities meet the requirements of design drawings and specifications, and whether the safety facilities have changed the design procedures.Whether the safety evaluation report and the compilation of special articles conform to the requirements of the guidelines and the actual situation of enterprises. (three) General Whether the building structure, building layout area, floor number, fire hazard, fire prevention zoning, fire resistance grade, 5 ventilation, pressure relief area, evacuation passage and safety exit of production and storage facilities meet the requirements of the code. 6 Whether the width, clearance height and turning radius of fire-fighting passage meet the requirements of "Code for Fire Protection in Design of Petrochemical Enterprises" (GB50160) and "Code for Fire Protection in Architectural Design" (GB50016). Whether the distance between overhead 7 power lines and production areas meets the requirements of national standards. The utility model relates to whether phosgene, chlorine and hydrogen sulfide 8 gas pipelines pass through public areas other than plant areas (including chemical and industrial parks). 9 Whether the completed plan of the general layout of the enterprise is consistent with the site. Are there any offices, operating rooms, fixed operating posts or lounges in the fire 10 hazard devices of Class A and B?Whether class A and B warehouses are adjacent to offices and lounges, or there are offices and lounges in the warehouses. 11 Whether storage tanks with different fire hazards are located in the same tank group, whether barriers are set up, and whether atmospheric storage tanks and pressure storage tanks are located in the same tank group. Whether there is a conveying pump in the fire dike of the flammable and flammable 12 liquid tank area, and whether the distance between the conveying pump outside the fire dike and the fire dike of the storage tank meets the requirements. Are the workshops and warehouses for the production, operation, storage and use of 13 dangerous goods in the same building as the staff dormitory and the safe distance from the staff dormitory in accordance with the requirements? Whether the gas holder is located on the upper side of the minimum frequency wind 14 direction of the year in the places where people are concentrated, open fires or sparks are emitted. 15 (four) Safety distance 16 Whether the regional oil (gas) pipeline crosses the factory area or not. Whether the fire protection spacing between enterprise facilities and adjacent factories or facilities meets the requirements of "Code for Design Fire Protection of Petrochemical Enterprises" (GB50160), and "Code for Fire Protection of Architectural Design" (GB50016). Whether the fire protection spacing of the general layout of production and storage facilities of enterprises meets the 17 requirements of "Code for Fire Protection in Design of Petrochemical Enterprises" (GB50160) and "Code for Fire Protection in Architectural Design" (GB50016). 18 Whether the external safety protection distance of "two key points and one major" production devices and storage facilities meets the requirements of national standards or not. Whether the side of the control room or cabinet facing the device with fire and 19 explosion danger meets the requirements of national standards on fire and explosion prevention. II. Guidance Contents of Inspection for Technological Specialty Inspectio n Inspection Guidance Guidance Item Project Number (1) Number Inspectio of n Inspectio guidance n Inspection Guidance Contents Guidance Content Process 20 Whether the