Fire Belt Knowledge Point 1Product identification: Compare the 3C certification type inspection report of the water belt to see if the product name, model and specification are consistent. 2Length of water belt: If the length of water belt is less than 1 m or more, the product can be judged as unqualified. 3Pressure test Cut 1.2m long water strip, press to test pressure smoothly, hold pressure for 5min, check whether there is leakage.Under the test pressure, the pressure should not be less than 3 times of the working pressure of the water belt when the pressure is increased to the sample blasting.If the test pressure of type 8 water belts is 1.2 MPa, the blasting pressure is not less than 2.4 MPa.

docxDoc Fire Belt Knowledge Point

Professional Docs > Common > Other > Preview
3 Pages 0 Downloads 49 Views 3.0 Score
Tips: If the document is garbled or fails to read, please download the document
Fire Belt Knowledge Point Page 1 Fire Belt Knowledge Point Page 2 Fire Belt Knowledge Point Page 3
Uploaded by admin on 2019-10-15 16:02:41
Rate
You can enter 255 characters
What is my domain?( answer:www.45doc.com )
comments
  • No comments yet